Painted Aluminum Sheet
1)Aluminum sheet and coil factory is here,with more than 10 years exporting experience.
2)Stable and high quality,customized aluminum products can be produced.
3)Quality is priority.
4)Kindly tell us what you need pls,we’ll try our best to meet your demand.
| Product | Painted Aluminum Sheet |
| Alloy | 1050 1060 1100 3003 3004 3105 5052 6061 |
| Thickness | 0.3-3.0mm |
| Width | 500-2000mm |
| Length | Any length is ok ,so long as it is suitable for transportation |
| Surface | Mill finish,Flat,Clean,embossed colored , |
| Film / Paper | Can be blue film coated or not, also can be paper between each sheet |
| MOQ | 3 MT , or depend on the SPECIFICATION . |
| Production Line | DC and CC |
| Coating Thickness | PE coating:15~18 micron |
| PVDF coating:25~28 micron | |
| Application | Roofing, Insulation for tank or power plat , car box ,decoration etc. |
| Kind attn | Custom Made, if any questions, pls do feel free to contact us . |
Decorative colored aluminum Coil & Sheet is to make the wire drawing on the aluminum surface by mechanical friction or extrusion process, then make one layer of special film treatment on the aluminum surface. which generate one layer containing this metallic composition on the aluminum roll surface, clearly appear each fine wire lines.so let the metal take fine hair gloss.Then make the chemical treatment in our modern Chemical Treatment production line, after that make PVDF or Polyester (PE) Coating in Solid colors or Metallic Colors through the color coating production line.
Here-XF In Professional slitting line,to divide the coil into any width, with accuracy +-0.02mm;
Professional cutting line,to make sheet with any length;
So different specification of decorative colored aluminum coil are available,we provide customized service.
| Product | Surface Treatment | Thickness Range | Width Range | Length Range |
| PVDF decorative colored aluminum coil | PVDF Coating | 0.3~3.0MM | Max 2000MM | Coil & Sheet |
| PE painted aluminum coil | PE Coating | 0.3~3.0MM | Max 2000MM | Coil & Sheet |
PVDF decorative colored aluminum coils & sheet:
PVDF color coated aluminum coil with good PVDF paints and high performance of aluminum coil is produced by advanced roller coating. Meanwhile One side paint or two side.
1)Excellent weather-proof durability
2)Anti-ultraviolet
3)High erosion resistance
4)Stable color and gloss
5)Good mechanical processing performance
6)Abrasion resistance
7)Anti-impact
8)High flexibility
PE painted aluminum coil & sheet:
PE painted aluminum coils using high-grade polyester lacquer coating material,finished coated coils are with delicate color uniform texture,color and diverse.it is the most popular and most common used materials in decorative usage.PE coated aluminum are widely used in ACP(aluminum composite panel) production and indoor ceiling usaged.Meanwhile One side paint or two side.
Meanwhile available in a wide variety of standard colors(Customer’s sample or Ral color),an efficient custom color matching process provides quick delivery of special colors to meet customer needs.
And also If you need a custom size, we can provide you with the widths and lengths you require. We have cut-to-length, slitting, blanking and shearing capabilities. We can also slit aluminum coil to the size you require for your project.
As painted aluminum specialists, we are able to provide various types of custom orders.
Kindly tell us what specification you need,and mainly for what use , so reasonable advise will be served to your good company.
Product on Show:
 |  |  |
| Series | Alloy | Temper |
| 1000 series | 1050 1060 1100 1200 | O H12 H22 H14 H24 H16 H26 H18 |
| 2000 series | 2A12 | H112 T4 |
| 2024 | T4 | |
| 3000 series | 3003 3A21 | O H12 H22 H14 H24 H16 H26 H18 |
| 3004 3105 | O-H18 H32 H34 H111 H112 | |
| 5000 series | 5052 5005 5754 5083 | O H32 H34 H111 H112 |
| 6000 series | 6061 6082 | T6 T4 |
| 7000 series | 7075 | T651 |
| 8000 series | 8011 | O H22 H18 |
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Other | Aluminum |
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | - | 0.03 | 0.03 | 0.03 | 99.6 |
| 1100 | 0.95 | 0.05-0.2 | 0.05 | - | - | 0.1 | - | 0.15 | 99 | |
| 2024 | 0.5 | 0.5 | 3.8-4.9 | 0.3-0.9 | 1.2-1.8 | 0.1 | 0.25 | 0.15 | 0.15 | remaining |
| 3003 | 0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | - | - | 0.1 | - | 0.15 | remaining |
| 3004 | 0.4 | 0.7 | 0.25 | 1.0-1.5 | 0.8-1.3 | - | 0.25 | - | 0.15 | remaining |
| 3105 | 0.6 | 0.7 | 0.3 | 0.3-0.8 | 0.2-0.8 | 0.2 | 0.4 | 0.1 | 0.15 | remaining |
| 5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.5-1.1 | 0.1 | 0.25 | - | 0.15 | remaining |
| 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.15-0.35 | 0.1 | - | 0.15 | remaining |
| 5754 | 0.4 | 0.4 | 0.1 | 0.5 | 2.6-3.6 | 0.3 | 0.2 | 0.15 | 0.15 | remaining |
| 5083 | 0.4 | 0.4 | 0.1 | 0.4-1.0 | 4.0-4.9 | 0.05-0.25 | 0.25 | 0.15 | 0.15 | remaining |
| 6061 | 0.4-0.8 | 0.7 | 0.15-0.4 | 0.15 | 0.8-1.2 | 0.04-0.35 | 0.25 | 0.15 | 0.15 | remaining |
| 6082 | 0.7-1.3 | 0.5 | 0.1 | 0.4-1.0 | 0.6-1.2 | 0.25 | 0.2 | 0.1 | 0.15 | remaining |
| 7075 | 0.4 | 0.5 | 1.2-2.0 | 0.3 | 2.1-2.9 | 0.18-0.28 | 5.1-6.1 | 0.2 | 0.15 | remaining |
STANDARD SEAWORTHY PACKING,OR AS CUSTOMERS’REQUEST.
| | | |
| | | |
| | | |
| Aluminum sheet | Aluminum coil | Aluminum roofing sheet |
6 semi-continuous casting production line,10 continuous casting and rolling production line,7 cold rolling mill,professional R&D team,all these make stable and high quality.Great great thanks for the mature team of XF family,so that we can provide the best service to our clients.
At the start,we serve customers in a small radius of Jinan City,and now we have 10 years exporting experience and exported to more than 25 countries in the world.
We are proud that we can serve the products meet your demands.Sincerely hope that you are here with us on the way to become more excellent.And warmly welcome to come to visit our company,to find that we do be a good supplier.
Thanks for the customers we worked with,thanks for the opportunity to work with you.
XF president -- William Tong
Now you will find that XF is a leading manufacture and distributor in the international market as well as the domestic metals industry =.Soon you will find that you are cooperating with a super factory! We have been moving forward with our dreams.
Q1:Are you manufacture or trading company?
XF:Manufacture is here my friend.
Q2:When can I get your reply after the inquiry?
XF:Within 12 hours, our professional sales rep. will contact you asap.
Q3:Can you provide samples?
XF:Free sample can be served for checking quality.
Q4:Do you accept any quality test from a third part before out of factory?
XF:A third party inspection is welcomed.
Q5:What is your acceptable price term?
XF:FOB CNF CIF DDU CPT , which one suit you?
Q6:How about the delivery time?
XF:Based on the order,normally within 15-20 days after receiving deposit.
